Revo RELPTZ22-1 Advanced Features - Manual (Page 17)

REVO America www.revoamerica.com RELPTZ22-1
15
5. You can also overwrite the programmed number and to remove a stored number from the
Tour. Press the HOME key on the stored number, a blank position mark (---) will be
displayed.
6. Repeat steps 2 through 5 for each desired Preset position. Each title will be displayed on
top of the line.
7. To create a unique title, refer to the Titling procedure.
8. Select SAVE AND EXIT and move the joystick to the right. Press the ESC key
to exit the
program without saving.
9. To store the Tour that you created as the default programmed action for the camera,
navigate to the DOME SETUP menu and select HOME FUNCTION. Refer to the Home
Function procedure.
Alarm
The Alarm Setup menu enables you to set alarm inputs and outputs to and from the camera.
ALARM SETUP
NO PRI FUN IN OUT HLD LATCH
01 1 001 NC ON 03 OFF
SAVE AND EXIT(ESC TO CANCEL)
NO: There is one input Alarm available.
PRI: The input Alarm has a priority of 1.
FUN: Function. Stored Preset number to be called by alarm.
IN: Input. Specifies the type of input that will trigger the alarm.
NO: Normally open.
NC: Normally closed.
OFF: Ignore input.
OUT: Output. Specifies the alarm output from the camera.
ON: 5 V TTL output on.
OFF: No output
HLD: Hold. Alarm will be held for programmed time (03 to 99 seconds).