Revo RELPTZ22-1 Advanced Features - Manual (Page 7)

REVO America www.revoamerica.com RELPTZ22-1
5
The Advanced Features on the Dome Menu
Auto Scan Enables you to set a programmed scan of an area such as a room. You can set
the camera to start in one location and move to another location and then back
to the starting location at a preconfigured speed. Up to 5 different Auto Scans
may be configured.
Preset Enables you to create presets, which are programmed video scenes, based on
specific pan, tilt, zoom, and focus settings. For example, one preset may be a
close up view of the back door, while another may be a window in the same
room. Think of a preset as if you had a camera in your hand and were taking
photos of various objects in a room. Up to 120 Presets may be programmed for
this camera.
Tour This menu provides the options for creating tours, which are a programmed
sequence of Presets, Auto Scans, Patterns and even other Tours. Up to 4 tours
may be programmed.
Alarm This menu manages input alarms, which will trigger camera action and output
alarms, which may be used to trigger an audio or visual alarm indication
.
Area Title A user defined name for a specific area that the camera views that has a
specific pan and tilt range. This menu guides you through the process of
defining and naming the area.
Titling
Many of the features provide the ability to create titles that appear on the monitor when the
camera reaches a specific position, or to label an Auto Scan, Preset, Tour, etc. Rather than
describe the procedure to create a title in every description, the instructions are provided here.
The titling procedures are the same for all functions. The amount of characters allowed for titles
do change depending upon the function. Maximum characters allowed are noted in each
description. Note that Presets must be created before you create the title.
To create a title, proceed as follows: