Revo RELPTZ22-1 User Manual - Manual (Page 33)

REVO America www.revoamerica.com RELPTZ22-1
31
FACTORY DEFAULT Selection of Factory Default displays the following submenu.
FACTORY DEFAULT
ARE YOU SURE ?
CANCEL
OK
Selecting OK will restore the factory defaults and delete any changes that you have made.
ERASE PROGRAMMED DATA Selecting this submenu will enable you to choose which of the
data that has been stored on the camera’s Flash-ROM you wish to erase. You will be asked to
enter ON or OFF. If you desire to erase all data then select ERASE, otherwise press the ESC key
on the keyboard controller to exit without erasing. The erased data includes all stored data (Auto
Scan, Preset, and Tour….).
ERASE PROGRAMMED DATA
AUTO SCAN : ON
PRESET : ON
TOUR : ON
ALARM : ON
AREA TITLE : ON
CAMERA : ON
DOME SETUP : ON
ERASE
SAVE AND EXIT(ESC TO CANCEL)
PRESET FOCUS DEFAULT Selecting the Preset Focus Default submenu allows you to
select the default focus mode of the camera. The choices are:
AUTO/MANUAL/ONE PUSH.