Revo RELPTZ22-1 User Manual - Manual (Page 8)

REVO America www.revoamerica.com RELPTZ22-1
6
last device. Set this using DIP switch S2 PROTOCOL (Figure 1). If this camera is to be the last
device, set S2-D1 to ON. If it is not the last device, set S2-D1to OFF.
S2
S2 D1
Terminated ON
Not terminated OFF
TIP
Set up all of your devices now to ensure that you only have one selected as the last
device. Record which device is the last device for future reference.
Setting Camera Address
Each camera requires a unique camera address so that the control device knows which camera is
at your back door and which camera is monitoring your driveway. Think of the camera address as
a telephone number. In order for the video system to work with multiple cameras, it has to know
which one is which.
DIP switch S1 DOME ID (Figure 1) is used to set the camera address. Apply the settings for each
camera in your video system as shown in the following table. Up to 255 cameras may be set up.
Settings are provided here for eight cameras, either dome or other types. If you are setting up
more than 8 cameras, please visit our website at www.revoamerica.com and download our
Advanced Features manual RELPTZ22-10AF.
NOTE
This is an important step. If you do not set the camera addresses correctly, there will be
communication errors.