Revo RELPTZ22-3 Advanced Features - Manual (Page 16)

REVO America www.revoamerica.com RELPTZ22-3
14
Tour
This menu provides the options for creating Tours, which are a programmed sequence of events
for the camera. A tour can include up to 42 Presets and save them. Up to 4 Tours may be
programmed.
TOUR SETUP
NUMBER : 01
TITLE : T01
DWELL : -- SEC
001 003 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- 002 --- --- --- ---
--- 004 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- --- --- --- --- ---
SAVE AND EXIT(ESC TO CANCEL)
NUMBER: 01-04. Selects the Tour number to be programmed.
TITLE:
Tour title that will display when this tour is selected.
DWELL:
03-99 sec. Sets the dwell time for the tour actions.
Tour Actions: - - -: Blank position
003: Indicates Preset number 3. You can select 42 of the 240 available
Presets to use in a Tour.
Follow the steps below to program the Tours:
1. Press the MENU key to display the main menu on the monitor. Scroll to Tour and move the
joystick to the right to enter the Tour menu. Or, just press the TOUR key on the keyboard.
2. Select NUMBER and set the desired Tour number by pushing the joystick to the left or
right.
3. Choose a blank position to be programmed by moving the joystick up, down, right, or left.
4. To add a stored Preset, twist the joystick then the stored Preset number displays. Continue
adding Presets as required.