Revo RELPTZ22-3 Advanced Features - Manual (Page 9)

REVO America www.revoamerica.com RELPTZ22-3
7
The Home Function is located on the DOME SETUP menu, which is described in the User
manual. To access the Home function, navigate to the DOME SETUP menu and select the HOME
FUNCTION SETUP menu.
HOME FUNCTION SETUP
HOME FUNCTION : Preset
FUNCTION NUMBER : 10
WAITING TIME : 120 SEC
FUNCTION ENABLE : ON
SAVE AND EXIT(ESC TO CANCEL)
In the example shown above, the camera will go to Preset 10, 120 seconds after manual control
has stopped, when Function Enable is set to ON. If None is selected, nothing will happen.
HOME FUNCTION:
None/Tour/Auto Scan/Preset.
FUNCTION NUMBER: The number of the Tour, Auto Scan or Preset that you want to start.
WAITING TIME:
The amount of time the system will wait before starting the Home
Function. You can set it for 10-240 seconds.
FUNCTION ENABLE
ON/OFF. Set to ON to enable the Home Function.
SAVE AND EXIT To save the selection, move the joystick to the right. To exit without
saving changes, press the ESC key.