Revo REVDN650-1 - Manual (Page 18)

17
Activate only AC power inputted.
5) White Pixel
¾ Det Exe : Press Enter button to turn White Pixel Compensation mode Start.
„ ENT to Adj : Press Enter button to start White Pixel Compensation start.
„ Proc : Process to find white pixel.
„ Done : Process ended
¾ Det Count : Result of white pixel detection.
¾ Func : Select erasing white pixel function On/Off using the Left and Right buttons.
¾ Det Level : Select the judgment level of white pixel using the Left and Right
buttons (1~16)
¾ Det View : Select display of detected white pixel.
6) Day/Night
¾ Mode : Select D&N mode.
„ Auto : Filter operates automatically according to brightness.
„ Day : The camera outputs the video image only in color.
„ Night : The camera outputs the video image only in black and white.
„ Ext : This menu automatically converts the COLOR Mode into the B/W
Mode or vice versa depending on illumination with an external sensor.
¾ Night Mode : Select B/W Burst On/Off
¾ Delay(s) : Adjust the working time of the filter when D&N mode is Auto (1-60 sec).
¾ D>N Level : Select switching level Day to Night when D&N mode is Auto (0-15).
¾
N>D Level : Select switching level Night to Color when D&N mode is Auto (0-15).
<Bottom Line Menus>
When user entered in main menu and sub-menus, following menus will be appeared.
I. Main Manu (menu in bottom lines)
A. Exit : Save & Exit.
B. Load : Load Default Value.
II. Sub Menu (menu in bottom lines)
A. Return : Return to previous menu.
B. Exit : Save & Exit
1) Exit Menu
¾ Save&Exit : Current environment values save.
¾ Exit : Disappear menu osd.
2) Load Default Setup
¾ Yes : Load default to current configuration and return to previous menu.
¾ No : No operation, and return to previous menu.