SHIMPO 933 - Manual (Page 18)

18
Section 4
Configuration
LCTS Configuration
The main window of the LCTS software application is shown in Figure 10. The recessed
areas and check boxes show test results gathered from the LCTS. The data in non-
recessed areas indicated test parameters and configuration settings used in verification
of the tested item. This window shows all the test result data downloaded from the
LCTS. It shows most, but not all, of the configuration parameters. Parameters not shown
here are available in the configuration data dialog window. These parameters include
the test time limits, the contact type (normally Open/Closed) and the SUTV/SLTV
transition threshold (see Section 3). The status bar at the bottom of the main window
displays characteristics of the LCTS.
None of the text or check boxes on the main window screen can be modified. They are
for display of test results and configuration data. The only active resources on this
window is the menu bar and the Sample button. The Sample button interrupts the LCTS,
whether it is testing or not, and downloads a complete copy of all the information in the
tester. The sample time and date are displayed beneath the button. All the other fields of
the screen are also updated.
Figure 10.
Model 933A Application Software Main Window