SHIMPO 933 - Manual (Page 7)

7
Software Installation
Begin the setup process by installing the application software. This software is on the
CD provided with the basic unit. Since you are viewing the manual provided on this disk
it is assumed that the installation should be complete. If not, follow the instructions
below.
• Close all other windows applications before starting the installation.
• Insert the 933A Software installation CD in the CD disk drive of your computer.
On most systems, the installation program will begin running as soon as the
computer sees the disk inserted. If not, navigate to CD file folder using Windows
Explorer or My Computer. Double click the setup.exe file.
• The installer will ask you to shut down any other applications that may be running.
Press the OK button if you have already closed other programs.
• A dialog box will appear which will allow you to change the location on your hard-
drive where the 933 application will be stored. You may change this location if
necessary, but TRICOR recommends the default setting. Press the large button
(top left) on this dialog to begin the installation.
• A second dialog appears that allows the name of the program group on the start
button menu to be changed. Again, TRICOR recommends that the default setting
be used.
• The software installs quickly and a dialog indicating successful completion
should appear. Click OK. The Life Cycle application software is now ready to
use.