Thermo Fisher Scientific CyberScan DO 1500 - Manual (Page 15)

Instruction Manual CyberScan DO 1500
12
3. Press enter to go to the ‘Pressure adjustment’ setup page as
shown below.
4. Adjust the pressure value using the and keys.
5. Press enter key to confirm selection and to go to next setup
page OR press std to exit from this page without confirming the
change mode.
press to accept enter
press to set value
mmHg
)
You can escape setup mode at any time by pressing std. Pressing
enter will always return the display to the measurement mode after
accepting the setup option.