Thermo Fisher Scientific CyberScan DO 1500 - Manual (Page 30)

Instruction Manual CyberScan DO 1500
27
4.1.10. Setup P10.0: Stop Bit
This setup option allows you to set the stop bit of the communication
protocol interface.
press to set value
press to accept enter
Print
press to set value
press to accept enter
Print
To Set Stop Bit
1. Access the Setup pages menu from the measurement mode by
pressing the setup key.
2. Press
the or key in setup mode to access the Set Stop Bit
setup page. Press enter to access the setup page.