Thermo Fisher Scientific Alpha COND 500 - Manual (Page 27)

26
7 FACTORY DEFAULT SETTINGS
SETUP
PAGE
FUNCTION
DEFAULT
SETTING
SET rng
Selection of effective conductivity range
Setting low zooming selection
Setting high zooming selection 1999 uS, r3
0 uS, Lo
1999 uS, Hi
SET °C
Selection of Automatic or Manual
Temperature Compensation
AtC On
SET HLd
Selection of HOLD current to be of 22 mA or
the last current output value
HLd OFF
SET org
Selecting Out of Range current output to be
constant 3.8 mA or 4mA for under range
and 20 mA for over range
org OFF
SET tPr
Setting Temperature Coefficient
Setting Normalization Temperature 2.1%
25.0 °C
SET CEL Selecting the various cell constant K = 1.0
SET Lnr Setting the line resistance value 0.00
CAL Viewing current calibration point --- ; r3
ELE Viewing electrode’s current cell constant K = 1.000; r3
rSt
Selection of calibration reset or factory
default reset
rSt CAL; rSt FCt