Thermo Fisher Scientific Alpha pH 560 User Manual

Page 39

Advertising
background image

34

Thermo Scientific Alpha pH 560

to their default values.

4

Select operation mode: The upper display shows the last

configured operation mode. (‘ASY’ or ‘SY’).

Press or key to select your desired operational mode.

Press ENT key to confirm your selection.

5

5

Reset to factory defaults: The display shows ‘nO dEF’.

Press or key to select:

nO

dEF:

Not default reset of the pH Controller. User configured
values remain active, when confirmed by pressing ENT
key.

FCt

dEF:

Reset all settings of the pH Controller to factory
defaults, when confirmed by pressing ENT key.

CAL

dEF:

Reset all calibration settings of the pH Controller to
factory defaults, when confirmed by pressing ENT key.

Press

ENT

key to confirm your selection.

If ‘nO dEF’ was selected, the pH Controller reverts to Cnfg
screen. Press or key to access other setup screens or
Press and key simultaneously (escape) to return to
measurement mode.

If ‘FCt dEF’ or ‘CAL dEF’ was selected, the pH Controller
performs the selected reset and returns to measurement mode.


Press or key to access other setup screens or Press and
key simultaneously (escape) to return to measurement mode.

To exit from any intermediate steps, Press and keys
simultaneously (escape). The pH Controller returns to the first screen
configuration settings (Cnfg).

Press or key to access other setup screens or Press and
key simultaneously (escape) to return to measurement mode.
To exit from any intermediate steps, Press and keys
simultaneously (escape). The pH Controller returns to the first screen
configuration settings (Cnfg).


Advertising