The live view page – Axis Communications 210A User Manual

Page 11

Advertising
background image

11

AXIS 210/210A/211/211A - Accessing the Camera

The Live View Page

Depending on whether or not the Live View page has been customized, the buttons

described below may or may not be visible.

To resize the video image, click the View Size buttons: half-size (x

1

/2

),

full-size (x1), x2 or x4. Note that this does not change the video

image’s resolution, but simply how it is displayed. Changing the View

size is not available in Sequence Mode.

The Video Format drop-down list allows the video format on the Live View

page to be temporarily changed.

These buttons start and stop the Sequence Mode. This mode is created in

Setup > Live View Config > Sequence mode, and automatically displays the

view from 2 or more video sources at set intervals.

From the Source list, select the desired external video source. Note

that Sequence Mode must be stopped before selecting a source from

this list.

The Action buttons can trigger an event directly from the Live View page.

These are configured under Setup > Live View Config > Layout.

The Snapshot button saves a snapshot of the video image currently being

displayed. Right-click on the video image to save it in JPEG format on your

computer. This button is primarily intended for use when the AMC viewer

toolbar is not available.

The Output buttons control the

output directly from the Live

View page. These buttons are

configured under Setup > Live

View Config > Layout.

Pulse - click this button to activate the

output for a defined period of time, e.g.

to switch on a light for 20 seconds.

Active/Inactive - click these buttons to

manually start and stop a connected

device, e.g. switch a light on/off.

Advertising
This manual is related to the following products:

211