Axis Communications 210A User Manual
Page 12
12
AXIS 210/210A/211/211A - Accessing the Camera
Audio controls for AXIS 210A/211A
There are also controls for controlling the client computer’s speaker output and
microphone sensitivity. These controls are only available when audio is enabled, see
Push-to-talk settings are made in the AMC control panel, see
The AXIS Media Control, on page 15.
Click the Speaker and Microphone buttons to switch the sound off and on for
the speaker and microphone, respectively.
Use the sliders to control the volume on the speaker and
microphone. The volume can be set between 0 and 100. The Buffer
slider controls the size of the buffer for audio. A higher level will
reduce audio break-up, but may introduce a noticeable lag in
audio transmission. There are four settings i.e. min, low, high and
max.
When using Half-duplex mode, this button toggles between allowing you to
speak and listen. The first icon indicates that you can talk and the speaker
attached to the camera will play your voice. The second indicates that you will
hear audio from the camera, but no audio will be sent to any web clients.
When in simplex talk mode, the icon toggles between allowing you to speak and is
dimmed when you do not want other clients to receive any audio.
The Live View toolbar displays the following buttons:
The Play/Stop button starts and stops the live video stream.
The Snapshot button saves a snapshot of the video image currently being
displayed. The Snapshot function and the target directory for saving snapshots
can be configured from the AMC Control Applet in the Windows Control Panel
(Internet Explorer for Windows only).
Click the View Full Screen button to make the video image fill the entire screen
area. No other windows will be visible. Press Esc (Escape) on the computer
keyboard to exit full screen.