Audient ASP8024 Dual Layer Control Module - Manual (Page 29)

Page -29- © Audient Ltd
Other Select Modes - Analogue Layer.
There are three further select modes available on ASP2802
which are used in the analogue layer.
For more specfic information about the functionality of these
modes, please see the main analogue manual.
Solo-In-Place Safe - not used in the DAW layer, please consult
the full ASP2802 analogue manual for more information.
Automation Safe - used in the analogue layer for isolating
channels from any automation control data, ideal for trying
out a new ride before recording the pass of automation.
Unity - used in the analogue layer to provide a quick and
easy way to position the channel fader at the unity gain
(0 dB) position. This is very useful if you are setting up a
stem session for analogue summing etc.
To use these functions press the function required in the select
mode panel and then press the large channel select switches
(18) on each and every channel that requires the application of
the function selected.
Control Surface Functions