Audient ASP8024 Dual Layer Control Module - Manual (Page 32)

Page -32- © Audient Ltd
Pan Mode + Assign
By pressing the assign key (30) when in
pan mode, the encoders provide access to
assigning channel inputs and outputs.
This is very useful for setting up inputs
for recording or bussing architecture when
mixing.
Input assigns are set on page one. Use the
page keys (26) to access outputs via page two.
Rotate the encoder to the desired input, bus
or output and press the encoder to select the
destination.
To aid you in navigating your studio setup at a faster pace, try
using the Pro Tools setup I/O labelling system to name buses
something simple (shortform text) and useful.
Control Surface Functions