Badger Meter Recordall Transmitter Register (RTR) - Manual (Page 6)

Recordall®, 308 Summator/Splitter
2. To prevent the connectors from being installed incorrectly, each connector is keyed so the two halves are correctly
aligned. Align the male and female connector keys and gently push both together. While pushing the connector
assemblies together, two audible clicks indicate complete connection.
Male connector
Female connector
Key
Key
Figure 2: Male and female connectors and keys
3. Position the anti-tamper collar (66233-004) over the connector and close it. The two tabs snap in place when the
anti-tamper collar is fully engaged.
Figure 3: Close anti-tamper collar
OTEE: N When connecting the Summator/Splitter to a Dual RTR (for older style Recordall Compound Meters), you will also
need the Submersible Connector to 308 Connector Jumper Harness. This cable allows customers to connect the Dual
RTR that has a submersible connector to the input end of the Summator/Splitter which features the
308 in-line connector.
Proctective
connector
caps
308 In-line connectors
(these connectors plug into
the 308 in-line connectors
on the Summator/Splitter)
Submersible connector
(this end plugs into the Dual RTR)
Figure 4: Submersible connector
Page 6 August 2014