Badger Meter Series 310 Analog Transmitter - Manual (Page 4)

Due to continuous research, product improvements and enhancements, Badger
Meter reserves the right to change product or system specifications without notice,
except to the extent an outstanding contractual obligation exists.
BadgerMeter, Inc.
P.O. Box 581390, Tulsa, Oklahoma 74158
(918) 836-8411 / Fax: (918) 832-9962
www.badgermeter.com
Please see our website at www.badgermeter.com
for specific contacts.
Copyright © Badger Meter, Inc. 2009. All rights reserved.
Badger ® and Data Industrial ® are registered trademarks of Badger Meter, Inc.
Model 310 Specifications
Power Requirements:
Loop Input Voltage 9-35VDC
Input Frequency:
0.4 to 10 KHz
Load Resistance
Max 750Ω@24VDC
Output Response Time
Varies with filter
Temperature (operating):
-29°C to 70°C
-20°F to 158°F
Temperature (storage):
-40°C to 85°C
-40°F to 185°F
Accuracy
± 0.04% of reading over entire span
Linearity
0.1% of full scale
Warranty
Data Industrial Corporation (“Seller”) of 11 Industrial
Drive, Mattapoisett, Massachusetts 02739-0740,
U.S.A., warrants to the original purchaser of its prod-
uct that such product manufactured by Data Industrial
Corporation shall be free from defects in materials or
workmanship when installed, serviced and operated
according to Data Industrial Corporation instructions or
in other such normal use. This warranty is effective for
a period of 12 months from the date of installation by
the Purchaser or 18 months from the date of shipment
by the “Seller” whichever occurs or terminates first. This
limited warranty does not cover damage or loss result-
ing from corrosion or erosion caused by acids or other
chemicals or by severe environmental conditions or
negligent or improper installation or improper operation,
misuse, accident, unauthorized repair or substitution of
components other than those provided by the “Seller”,
and does not cover limited life components such as
bearings, shafts, impellers where wear rate is a function
of application and environment. Any component not
manufactured by the “Seller” but included in its products
shall not be covered by this warranty and is sold only
under such warranty as the manufacturer may provide.
If Buyer or Purchaser wishes to make a claim hereun-
der, he shall send written notice of any defect within
the warranty period, to “Seller” at the above address.
“Seller” may at its sole option instruct Buyer to ship
subject part, postage prepaid, to the “Seller” at above
address or authorize a representative to inspect the part
on site. “Seller” will at its sole option repair or replace
any defective product covered by this warranty. If Buyer
makes repairs or alterations to any product or part
covered by this warranty without “Sellers” prior written
approval, this warranty shall be null and void.
The foregoing shall constitute Buyers or Purchasers
sole and exclusive remedy against “Seller”, and no
other remedy, including but not limited to, incidental
or consequential damages for personal injury, loss of
fluids, gases or other substances or for loss of profits
or injury to property or person shall be available to the
Buyer or Purchaser. The warranty extended herein
shall be in lieu of any other implied warranty of mer-
chantability or fitness for a particular purpose, and seller
shall bear no liability for representatives or retail sellers.
In no event shall Data Industrial Corporation be liable
for any contingent, incidental, or consequential damage
or expenses due to partial or complete inoperability of
its product.
All rights reserved. No part of this work covered by
the copyrights hereon may be reproduced or copied
in any form or by any means - graphic, electronic, or
mechanical, including photocopying, recording, taping,
or information and retrieval systems -- without written
permission of Data Industrial.