Badger Meter CV Series - Manual (Page 3)

Form #4-20-23 11/10 Page 3
Specifi cations
(continued)
LPL - Low-Loss Design (Short Form) / VILPL - Insert Version
Pipe Sizes: ½ to 60 inches and larger (13 to 1524 mm)
Pressure & Temperature: Varies, dependent upon materials of construction
Pressure Loss: 3% of DP maximum
Turndown Ratio: 10:1
Process Connections: LPL; NPT, fl anged, butt weld, socket weld, grooved
VILPL; Insert fi ts between pair of fl anges
Instrument Connections: NPT, socket weld
Accuracy: ±3-5% of reading uncalibrated; ±0.5% of reading calibrated
Standard Beta Ratios: -10, -20, -38, -65;
exact sizing available to provide custom beta ratios
CV Series
Pipe Sizes: 2 to 16 inches and larger (51 to 406 mm)
Pressure: 300 PSIG (2070 kPa) maximum
Temperature: 250 °F (120 °C) maximum
Process Connections: NPT, butt weld, fl anged, grooved
Instrument Connections: NPT
Standard Beta Ratios: -38, -65
VBR Series
Pipe Sizes:
½ to 2 inches (13 to 51 mm)
Pressure: 400 PSIG (2756 kPa) maximum
Temperature: 250 °F (120 °C) maximum
Process Connections: FNPT, socket/sweat
Instrument Connections: NPT
Standard Beta Ratios: -10, -20, -38, -65