Badger Meter Registers - Manual (Page 4)

®
Due to continuous research, product improvements and enhancements,
Badger Meter reserves the right to change product or system specifications
without notice, except to the extent an outstanding contractual obligation exists.
BadgerMeter, Inc.
P.O. Box 245036, Milwaukee, WI 53224-9536
Telephone:
(414) 355-0400 / (800) 456-5023
Fax: (414) 355-7499 / (866) 613-9305
www.badgermeter.com
Copyright © Badger Meter, Inc. 2009. All rights reserved.
Please see our website at
www.badgermeter.com
for specific contacts.
C. INSTALLING DIFFERENT CHANGE GEARS
1. Repeat steps one through three in Section "A".
2. Loosen setscrews in gear hubs that hold
"driver and "driven" change gears to spindles
(Fig. 2).
3. Lift change gears from spindles.
4. Install different change gears. Note location
so that new gears are installed on correct
spindles (Figure 2).
5. Reinstall parts removed under procedure "1"
above. Restore power.
ORDERING INFORMATION
Order replacement parts through your local Badger
Meter sales representative or directly from Badger
Meter, Inc. When placing an order, provide the following
information:
a. Complete description of assembly or parts
required.
b. Part number of item as listed in illustrated
parts list.
c. Quantity of parts required.
d. Purchase order number plus exact return and
billing addresses.
Figure 3. Switch Adjustment
PIVOT
SCREW
NYLON
SCREW
COMMON
SWITCH
ADJUSTMENT
MOVEMENT
CAM
SWITCH
N.C.
N.O.