Kaman DIT-5200L - Manual (Page 5)

______________________________________________________________________________
Kaman Precision Products PART NO: 860522-001
www.kamansensors.com Last Revised 11/16/2012
- 5 -
Figure 3 Sensor Connections
The output on the channel will become more positive with movement toward the positive (+)
sensor. The output on the channel will become more negative with movement toward the
negative (-) sensor.
On single channel systems only the Axis 1 (X channel) is used.
The system is set up with the sensors as marked. Sensors are supplied as matched pairs for
optimum performance. Swapping sensors will result in degraded performance without factory
recalibration.
Function Sensor Label
Axis 1 Positive
Sensor
+X
Axis 1 Negative
Sensor
-X
Axis 2 Positive
Sensor
+Y
Axis 2 Negative
Sensor
-Y