JJC RM-T1 - Manual (Page 3)

Viewing operation with the remote control by connecting the camera to a
TV
Connecting the camera to a TV with a video cable or an HDMI cable and turning to the playback
mode enable you to operate viewing using the remote control. Most of the buttons on the remote
control have the same functions as the buttons on the camera.
z For details, refer to the camera's Operating Instructions.
z The S button, 2S button and PRINT button are used when shooting the image the camera is
connected to a PictBridge printer.
Slide show
The slide show button on the remote control easily starts/stops a slide show. During a slide
show, the following operations are available from the remote control.
z Displaying the previous/next image with
z Pausing/playing back the slide show with .
Printing
Once you connect the camera to an HDTV with an HDMI cable, you can easily print images while
viewing them on the TV.
1. Connect the camera to a TV.
2. Connect the camera to a PictBridge compliant printer.
3. Display the image you want to print.
4. Press the PRINT button on the remote control.
z For details about printing, refer to the camera's Operating Instructions.
Specification:
• Battery Type: 2x 1.5V AAA lithium battery
• Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
• Storage temperature: -20°C to +60 °C (-4 °F to 140°F)
• Operation distance: 1cm-15meters
• Mass: 30g
• Dimensions: Approx. 83.5 X 48.0 X 19.2 mm
• RM-T1 replaces SONY RMT-DSLR1 remote commander.