JJC RM-E7 User Manual
Page 2
2
1. The remote control is powered by a three-volt CR2032 lithium battery which is
already included in.
2. After sliding the latch in the direction showing how to unlatch the battery holder,
remove the holder.
3. Remove the battery from the battery holder.
4. Insert a fresh battery with the face marked "+" on top.
5. Slide the battery holder into the remote until the latch clicks into place.
z Specification
• 100% compatible with Pentax Remote E infrared remote controls.
• Works with all remote shutter release control modes (Quick-response, W/T
Zoom).
• Easy-to-replace CR2025 lithium battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Typical Battery Life: up to 3 years, 20,000 exposures.
z Care and Storage
1. When the remote control is not in used for an extend period of time, please
remove the battery from the remote control.
2. Do not leave the remote control in any places exposed to excessive heat, humidity
3. Do not leave remote control on or near a television, refrigerator, or other appliance
with a magnetic field.
4. If the remote control gets wet, wipe it with a dry towel as soon as possible.
5. Do not use organic solvents, such as alcohol or paint thinner when cleaning the
remote control.
Compatible with Pentax Cameras
K110D
K100D
K10D
*ist DL
K20D
K200D
KM
K2000
K-x
K7
Digital
SLR
*ist DS
*ist D
*istDS2
*istDL2
S
S4
S4i
S5i
S5n
S6
S7
430
450
550
750z
S50
Optio
S40
SV
330
A10
A20
A30
Film SLR
*ist
MZ6
MZ-L
ZX-L
Compatible with Samsung Cameras
Digital SLR
GX-1L
GX-1S
GX-10
GX-20
Copyright of JJC Technology Company