JJC JR Series - Manual (Page 5)

5
1. Turn off the camera and attach the JR receiver to a compatible camera’s accessory shoe.
2. Remove the remote socket cap from camera body and take out a connecting cord from the box.
3. Connect the connecting cord to the camera body and the remote socket of JR receiver.
4. Turn on the camera and mount the camera on a tripod or place the camera on a stable, level
surface.
5. Make sure the Control mode dial on the O section.
6. Use the JR transmitter and point to the JR infrared receiver to enjoy wireless trigger.
Instant Shutter
1. Connect the connecting cord to the camera body and receiver remote socket.
2. Shift the Function mode dial to “· “
3. Press the JR transmitter shutter button for one second.
4. The receiver will take a photo instantly.
Delay Shutter*
1. Connect the connecting cord to the camera body and receiver remote socket.
2. Shift the Function mode dial to “·· “
3. Press the JR transmitter shutter button for one second.
4. The receiver status light will flash.
5. The receiver will take a photo after 2 seconds.
*Delay Shutter does not work with Panasonic and Leica cameras.
Remote Cord Function Setup
BLUB
z Select the BLUB mode from the camera.