JLab Audio Shaker - Manual (Page 6)

TROUBLESHOOTING (CONT.)
Volume
-Turn up the volume on your portable device and/or the Shaker.
-Make sure the Shaker is fully charged
Sound is Garbled
-Turn down the volume on your device/phone and the Shaker
-Make sure the Shaker is fully charged
Unable to pair with a Bluetooth device:
-Confirm that your device is Bluetooth compatible.
-Reset the speaker by pressing and holding the Pair/Battery Check button for 12 seconds, then turn off and
turn back on.
SAFETY INSTRUCTIONS
1. Heed all safety warnings and follow instructions.
2. Do not use this device near water.
3. Clean only with a dry cloth.
4. Do not operate or store the device near any heat sources such as radiators, stoves or other devices that
produce heat.
5. Only use attachments and accessories specified by the manufacturer.
6. Unplug the device from power sockets during lightning storms or when unused for long periods of time.
7. Refer all servicing to qualified service personnel.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF POWER PLUG TO WIDE SLOT, FULLY INSERT.
Use of controls or adjustments or performance of procedures other than those specified may result in damage to
the unit and negative exposure to the user.
Danger of explosion if battery is incorrectly replaced. Do not attempt to replace without the manufacturer's
approval.
WARNING
To reduce the risk of fire or electric shock, do not expose this speaker or the accessories to rain or moisture.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a
protective barrier between the unit and surface to protect the surface.