Milestone Remote Client 3.5 - Manual (Page 26)

Milestone XProtect Remote Client 3.5; User’s Manual
The Joystick Setup window
The Joystick Setup window’s Joystick Axes section lets you configure the axes used for the joystick.
With a joystick, you are typically able to navigate images three-dimensionally, along three axes: an
X-axis, a Y-axis, and a Z-axis.
The Z-axis typically refers to the depth (zoom) level.
Example: X-, Y-, and Z-axes
The Joystick Axes section contains the following buttons and check boxes:
Button,
Check Box
Description
Invert y-axis Lets you invert the Y-axis.
This way, you are able to select whether the camera should move up or
down when you move the joystick towards you and away from you
respectively.
z-axis uses a
relative
positioning
scheme
Lets you specify whether the Z-axis should use a relative or an absolute
positioning scheme.
This will affect the way you zoom in and out with camera.
Default
values
Resets axes settings, letting you use the joystick’s default axes settings.
The Joystick Setup window’s Joystick Buttons section lets you specify which joystick buttons should
be used for particular actions:
To assign an action to a particular joystick button, select the required action in the list, then click
the required joystick button.
www.milestonesys.com Page 26 Further Configuration