Milestone Remote Client 3.5 - Manual (Page 39)

Milestone XProtect Remote Client 3.5; User’s Manual
Exporting Evidence in AVI and JPEG
Formats
With the Remote Client you are able to quickly generate and export video evidence in the AVI
(movie clip) and JPEG (still image) formats.
Note: Depending on your user rights, access to generating AVI or JPEG evidence from some
cameras may be restricted. Date and time formats used when browsing recorded video may vary
depending on your computer’s regional settings. Illustrations in this help topic, and date and time
formats used in the illustrations, are thus for guidance only.
To export video evidence, do the following:
1. Select the Remote Client’s Browse tab.
2. In the Browse tab’s Export section, specify start date and time for the export by typing the
date in the first Start Time field and the time in the second field.
Export section.
Tip: Instead of manually specifying date and time, you may use the Browse tab’s Time
Navigation features to move to the required start point, then click the upper of the Export
section’s Set links. This will automatically set the date and time of the viewed image into
the Start Time fields.
3. In the End Time fields, specify end date and time for the export.
As was the case with the start date and time, end date
and time must be in the correct format if specified
manually.
Alternatively, use the Set link as described above.
4. Select the required camera from the Source list.
5. Click the Export button. This will open an export dialog,
listing the specified start time, end time, and camera.
6. In the export dialog, select the required export format:
AVI (movie clip) or JPEG (still images).
7. Select whether to add timestamps from the surveillance
system to the exported images. If selected, timestamps
will appear in the corner of the images.
www.milestonesys.com Page 39 Exporting Evidence …