Timeguard EMU56 - Manual (Page 2)

1
The EMU56 Electronic Time Control Module is intended for
use in OEM equipment. It is designed to operate from 1.25 –
1.65V supply and produces an open collector PNP outlet
suitable for sourcing up to 0.25mA from the 1.5V supply when
in the ON state. The module operates within the temperature
range –10° to 50°C.
The EMU56 is designed for use with the PB04 power board
which is operated from 220-240V AC mains, provides a relay
output with voltage free normally open contacts which can
carry up to 10A resistive or 6A inductive, and provides a
battery backup supply to the module. PB04 operating
temperature –10°C to 60°C.
The EMU56 is supplied with a black plastic bezel size 60 x
47mm to fit panel cut out 56 x 44mm. The PB04 power board
occupies an area of 51 x 61mm and requires clearance of 30mm
above the PCB.