Timeguard EMU56 - Manual (Page 4)

3
Programming
Five setting buttons are provided, the Set button is used to
sequence the module in programming mode. The Day, Hrs
and Mins buttons are used to set the days, hours and minutes
required.
ON/OFF programmes can also be overridden till the third
subsequent programme change by using the O’ride button. To
prepare the module for programming clear the memory by
pressing both the Set and Day buttons simultaneously until the
display disappears. On releasing the buttons the display will
show 0:00 INT with the colon flashing.
Setting the Clock Time
To set the clock time press the Set button briefly and release,
the display shows 0:00 with "C" flashing at the right of the
display. Press the Day button until the black dot indicates the
desired day of the week (1-7). If in doubt, use day 1 as Monday.
ON
INT INT
ON C