Timeguard EMU56 User Manual
Page 7
6
pressing the Hrs and Mins buttons separately until the
desired time is displayed. Press the Set button briefly, and the
display will show with "INT" appearing
underneath the flashing "1". Note: INT = Interrupt and means
"OFF". The first "OFF" time for day 1 can now be
programmed by using the Hrs and Mins buttons. Press the
Set button briefly and the display shows and the
programme 2 "ON" time can be entered as for programme 1.
NB: Pauses of 15 seconds or more during programming will
result in automatic return to the operating condition.
Programming the module for day 1 should continue in this
way up to the programme eight if so desired.
Note: It is not necessary to enter all eight programmes
available to you on this day, those not required should be left
blank (––:––). You can also omit by not programming any
ON/OFF times on the day you require no switchings.
ON
INT
INT
ON
C
ON
INT
INT
ON
C