TOHO ELECTRONICS TTM200 - Manual (Page 219)

48-7009-E 6-71
6.11 Priority screen setting
■ Priority screens 1 to 16 setting
SEt19
PRI
Setting content Initial value
1 PRI01
Parameters for SEt 01 to SEt 17
oFF
2 PRI02 oFF
3 PRI03 oFF
4 PRI04 oFF
5 PRI05 oFF
6 PRI06 oFF
7 PRI07 oFF
8 PRI08 oFF
9 PRI09 oFF
10 PRI10 oFF
11 PRI11 oFF
12 PRI12 oFF
13 PRI13 oFF
14 PRI14 oFF
15 PRI15 oFF
16 PRI16 oFF
Set parameters frequently used or desired to display in the priority screen.
This enables a quick setting or display of the corresponding screen only by a press of the MODE key in the operating mode.
Max. 16 screens can be set.
Set to “OFF” when priority screens are not used.
Note Parameters not allowed with setting in the priority screens are listed below.
Take care that screens for such parameters are not displayed.
(1) All parameters in the initial value setting mode (SET 18)
(2) All parameters in the priority screen design mode (SET 19)
(3) All parameters in the bank setting mode (SET 20)
(4) All parameters of Program Function Setting (SET 21) 3
(5) All parameters of Program Setting (SET 22) 3
(6) All parameters of Bank Auto-Switch Function Setting (SET 23) 3
(7) Some parameters are not selectable, depending on ordered models.