UEi Test Instruments DT304 User Manual
Page 16
These guidelines will help you attain long and reliable service from
your meter:
1. Calibrate your meter annually to ensure it meets original
performance specifications.
2. Keep your meter dry. If it gets wet, wipe it dry immediately. Liquids
damage electronic circuits.
3. Whenever practical, keep the meter away from dust and dirt, which
can cause premature wear.
4. Although your meter is built to withstand the rigors of daily use, it
can be damaged by severe impacts. Use reasonable caution when
using and storing the meter.
Cleaning and Decontamination
Periodically clean your meter’s case using a damp cloth. DO NOT use
abrasives, cleaning solvents or strong detergents, as they may damage
the finish or affect the reliability of the structural components.
Storing the Thermocouples
The thermocouples with wire spools can be stored in the back of the
thermometer.
1. Wind the wire around the wire spool.
2. Thread the end of wire through
a hole of the wire spool.
3. Thread the end of wire through
the other hole of the wire spool.
4. Insert the end of wire under the
loop and pull the end of wire.
14