Brother QL-720NW - Manual (Page 20)

P-touch Template Command Reference
- 15 -
4. P-touch Template Limitations
4.1.3 Text Layout settings
 Character styles specified in P-touch Editor all become the same style within an object.
 If the “Long Text” setting is selected under “Text Layout” in P-touch Editor, the vertical alignment setting is
normally set for top alignment.
 If continuous length tape is used, the print length is increased to fit the text depending on the setting.
(Refer to “ 5.1 Relationship between the P-touch Editor settings and the printer image ” on page 21 for
details.)
 If the “Fixed Frame Size (Wrap)” setting is selected under “Text Layout” in P-touch Editor, the object size
does not change, and the text size is reduced.
“Fixed Frame Size (Wrap)” is a setting that was added for inserting long text. Since it is possible that the
text size may become extremely small if the wrapping feature is no longer applied, we recommend that
“Fixed Frame Size” be selected when die-cut labels or a fixed length is specified in P-touch Editor, or that
“Automatic Length” be selected when an automatic media length is specified.
Shrink to Fit
The text object size is fixed, and the text size is changed depending on the text
length.
Clip Text
The text object size is fixed, and the text size is fixed. If the text is too long, the text
is not printed.
Long Text
The text object width is fixed, and the text size is fixed. If the text is too long, the text
object height is increased.
Automatic
Length The text object height is fixed, and the text size is fixed. If the text is too long, the
text object width is increased.
Free Size
The text size is fixed. If the text is too long, the text object width is increased. If a
new line is started, the text height is increased.
Specifying a Text Layout setting
Click the button circled in red to display a drop-down list, and then select the desired option.