Brother QL-720NW - Manual (Page 65)

P-touch Template Command Reference
- 60 -
7. Control Command Details
ESC iXm2 Select character code set
ASCII: ESC i X m 2 n1 n2 n3
Decimal: 27 105 88 109 50 n1 n2 n3
Hexadecimal: 1B 69 58 6D 32 n1 n2 n3
Parameters
n1: 01h (Fixed)
n2: 00h (Fixed)
n3: 00h 01h 02h
Description
 Selects the character code set. (For details on the character code sets, refer to the character code tables
in “ Appendix B: Character Code Tables ”.)
n3=00h: Brother standard
n3=01h: Windows1250 (Eastern Europe)
n3=02h: Windows1252 (Western Europe)
 Invalid if n3 is set to a value other than 00h through 02h
 This command is a static command.
Example
 To set the character code set to the Brother standard:
ESC i X m 2 01h 00h 00h
(1Bh 69h 58h 6Dh 32h 01h 00h 00h)