AT&T 9002 User Manual
Page 21
19
If the phone does not ring when you receive a call:
•
Make sure the handset ringer is on.
•
Make sure the telephone line cord(s) is connected firmly to the base and
the modular telephone jack(s).
•
Make sure the AC adapter is plugged firmly into an outlet not controlled by
a wall switch.
•
You might be too far from the base; move closer.
•
You might have too many extension phones on your telephone line to
allow all of them to ring. Try unplugging some of them.
•
Press
c to change to another channel.
If you hear other calls while using your phone:
•
Press
c to change to another channel.
•
Disconnect the base from the modular jack and plug in a corded telephone.
If you still hear other calls, the problem is probably in your wiring or local
service. Call your local telephone service company.
IN CASE OF DIFFICULTY
9002_book.1AT&T
8/12/98, 4:09 PM
19