Apple Xserve G5 User Manual
Page 41
Chapter 3
Installing Your Server in a Rack
41
6
Connect the cables to the back panel of the server.
Important:
When connecting Ethernet cables, connect a cable to the lower Ethernet
port (port 1) first.
If you connect only one Ethernet cable, make sure to connect it to port 1.
7
Connect the power cord and its retaining clip to the back of the server.
If more than one power cord came with your server, use the appropriate cord for the
electrical service available at your location. Always use a long cord with the cable
management arm.
Important:
The short power cord provided with some systems is intended for use in a
rack that has its own power source. Do not use this cord for any other purpose.
1
2
Ethernet port 2
Link lights
Activity lights
Ethernet port 1
Serial console port
FireWire 800 ports (2)
Power socket
Gigabit Ethernet ports (2)
USB 2.0 ports (2)