Apple Xserve G5 - Manual (Page 44)

44 Chapter 3 Installing Your Server in a Rack
7 Verify that the arm’s position is correct by moving the arm inward so that it swings
under the cover of the server.
If the arm hits the cover or is not level as you move it, you need to adjust its position by
unscrewing one or both mounting screws and moving the arm up or down slightly
until it is level and moves smoothly under the server’s cover.
8 Connect the cables to the back panel of the server.
Important: When connecting Ethernet cables, connect a cable to the lower Ethernet
port (port 1) first.
If you connect only one Ethernet cable, make sure to connect it to port 1.
See “Connect Cables Directly to the Server” on page 54 for more information about
connecting cables.
Serial console port
FireWire 800 ports (2) Power socket Gigabit Ethernet ports (2)
USB 2.0 ports (2)
1
2
Ethernet port 2
Link lights Activity lights
Ethernet port 1