Brother HL 4570CDWT - Manual (Page 77)

Troubleshooting
72
8
I cannot complete the wireless network setup configuration.
Question Interface Solution
Is your security settings
(SSID/Network Key)
correct? wireless  Reconfirm and choose the correct security settings.
• The manufacturer's name or model no. of the WLAN access
point/router may be used as the default security settings.
• See the instructions supplied with your WLAN access point/router for
information on how to find the security settings.
• Ask the manufacturer of your WLAN access point/router or ask your
Internet provider or network administrator.
 For information on what the SSID and Network Key are, see SSID,
Network Key and channels in the Network Glossary.
Are you using MAC address
filtering? wireless Confirm the MAC address of the Brother machine is allowed in the filter. You
can find the MAC address from Brother machine's control panel. (See
Function table and default factory settings on page 37.)
Is your WLAN access
point/router in a stealth
mode? (not broadcasting
the SSID) wireless  You should type the correct SSID name or Network Key by hand.
 Check the SSID name or the Network Key in the instructions supplied
with your WLAN access point/router and reconfigure the wireless
network setup. (For more information, see Configuring your machine
when the SSID is not broadcast on page 17.)
I have checked and tried all
of the above, but still cannot
complete the wireless
configuration. Is there
anything else I can do? wireless Use the Network Connection Repair Tool. See Brother machine cannot print
over the network. Brother machine is not found on the network even after the
successful installation. on page 73.
Brother machine is not found on the network during the printer driver installation.
Question Interface Solution
Are you using security
software? wired/
wireless  Choose to search for Brother machine again on the installer dialog.
 Allow access when the alert message of the security software appears
during the printer driver installation.
 For more information about security software, see I'm using security
software. on page 75.
Is your Brother machine
placed too far from the
WLAN access point/router? wireless Place your Brother machine within about 3.3 feet (1 meter) from the WLAN
access point/router when you configure the wireless network settings.
Are there any obstructions
(walls or furniture, for
example) between your
machine and the WLAN
access point/router? wireless Move your Brother machine to an obstruction-free area, or closer to the
WLAN access point/router.