Brother HL 4570CDWT - Manual (Page 79)

Troubleshooting
74
8
Is your Brother machine
assigned with an available
IP address?
(continued)
wired/
wireless
1 (Windows
®
2000/XP, Windows Server
®
2003/2008)
Click the Start button, All Programs (Programs for Windows
®
2000),
Accessories and Windows Explorer, and then My computer.
(Windows Vista ® /Windows ® 7)
Click the button and Computer.
2 Double-click Local Disk (C:), Program Files or Program Files (x86)
for 64-bit OS users, Browny02, Brother, BrotherNetTool.exe to run the
program.
Note
If the User Account Control screen appears,
(Windows Vista
® ) Click Continue.
(Windows ® 7) Click Yes.
3 Follow the on screen instructions.
4 Check the diagnosis by printing the Network Configuration List.
Note
The Network Connection Repair Tool will start automatically if you check
Enable Network Connection Repair Tool from the Options tab on
Status Monitor. This is not recommended when your network
administrator has set the IP address to static, since it will automatically
changes the IP address.
If the correct IP address and the Subnet mask are still not assigned even
after using the Network Connection Repair Tool, ask the network
administrator for this information, or visit the Brother Solutions Center at
http://solutions.brother.com/.
Brother machine cannot print over the network.
Brother machine is not found on the network even after the successful installation. (continued)
Question Interface Solution