Brother HL 4570CDWT - Manual (Page 40)

Control panel setup
35
5
Reset the network settings to the factory default
5
You can reset the print server back to its default factory settings (resetting all information such as the
password and IP address information).
Note
• This function resets all wired and wireless network settings to the factory default.
• You can also reset the print server back to its factory default settings using the BRAdmin applications or
Web Based Management. (For more information, see Other Management Utilities on page 6.)
a
Press + or - to choose Network.
Press OK.
b
Press + or - to choose Network Reset.
Press OK.
c
Press + to choose Reset.
d
Press + to choose Yes for reboot.
e The machine will re-start.
Printing the Network Configuration List
5
Note
Node name: The Node name appears on the Network Configuration List. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a
Press + or - to choose Machine Info..
Press OK.
b
Press + or - to choose Print NetSetting.
Press OK.
Note
If the IP Address on the Network Configuration List shows 0.0.0.0, wait for one minute and try again.