Brother HL 4570CDWT - Manual (Page 49)

Web Based Management
44
6
Synchronize with SNTP server
6
SNTP is the protocol used to synchronize the time used by the machine for Authentication with the SNTP
time server. You can synchronize the time used by the machine on a regular basis with the Coordinated
Universal Time (UTC) provided by the SNTP time server.
Note
This function is not available in some countries.
a Click Network Configuration, and then click Configure Protocol.
b Select the SNTP check box to activate the setting.
c
Click Advanced Setting.
 Status
Displays whether the SNTP server settings are enabled or disabled.
 SNTP Server Method
Choose AUTO or STATIC.
• AUTO
If you have a DHCP server in your network, the SNTP server will automatically obtain the address
from that server.
• STATIC
Enter the address you want to use.
 Primary SNTP Server Address, Secondary SNTP Server Address
Enter the server address (up to 64 characters).
 Primary SNTP Server Port, Secondary SNTP Server Port
Enter the Port number (1 to 65535).