Brother PT-H500 - Manual (Page 26)

26 Power Supply
GETTING STARTED
AC Adapter
Use AD-E001 (AC adapter) for the P-touch labeler. AD-18 or AD-24ES cannot be used.
Connect the AC adapter directly to the P-touch labeler.
Insert the plug on the AC adapter cord into the connector marked DC IN 12V on the
P-touch labeler.
Insert the AC adapter plug into a standard electrical outlet.
Using the Rechargeable Li-ion Battery
 Installing the Rechargeable Li-ion Battery
Open the rear cover by pressing the cover latch.
1. Rear cover
2. Cover latch
Insert the rechargeable Li-ion battery into the
battery compartment.
1
2
• Turn the P-touch labeler off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
To safeguard and backup the P-touch's memory, when the AC adapter is unplugged it
is recommended to have AA-size alkaline batteries (LR6) or Ni-MH rechargeable
batteries (HR6) installed into the P-touch labeler.
2
1
1
2