Turning power on/off, Auto power-off time – Brother PT-H500 User Manual

Page 30

Advertising
background image

30

Turning Power On/Off

GETTING STARTED

Close the rear cover.

Press the Power key to turn the P-touch labeler on.

Press the Power key again to turn the P-touch labeler off.

Auto Power-Off Time

If you use the AC adapter or Li-ion battery, you can change the setting of the auto power-off time.

Press the Menu key, select “Auto Power Off” using the or key, and then press

the OK or Enter key.

Select the battery shown on the LCD display by using the or key and set the

value using the or key.
“AC Adapter” or “Li-ion Battery” can be selected.

Press the OK or Enter key.

If you cannot attach the rear cover, check to ensure

the white lever is in the up position. If not, lift the

lever, and then attach the cover.

4

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink

ribbon to be discharged with the tape. The tape may no longer be functional

after the ink ribbon discharges.

• Store tape cassettes in a cool dark location, away from direct sunlight and high

temperature, high humidity, or dusty locations. Use the tape cassette as quickly as

possible after opening the sealed package.

Extra Strength Adhesive Tape:

• For textured, rough, or slipping surface, we recommend using Extra Strength Adhesive Tape.

• Although the instruction sheet included with the Extra Strength Adhesive Tape

cassette recommends cutting the tape with scissors, the tape cutter that this P-touch

labeler is equipped with is able to cut Extra Strength Adhesive Tape.

Turning Power On/Off

• Your P-touch labeler has a power saving function that automatically turns itself off

if no key is pressed within a certain time, under certain operating conditions. Refer

to the “Auto Power-Off Time” for details.

• If the batteries are installed or the P-touch labeler is connected to an electrical outlet

by the AC adapter, the previous session’s information is displayed when the power

is turned on.

When you use alkaline batteries or Ni-MH batteries, the auto power-off time cannot be

changed. (The time is fixed to 20 minutes.)

1

2

3

Advertising