Brother MFC-8950DWT - Manual (Page 108)

101
Web Based Management
5
 Auth. Method
Choose the authentication method required for access to the CIFS server Auto, Kerberos
1
or
NTLMv2
2
.
1 Kerberos is an authentication protocol which allows devices or individuals to securely prove their identity to network servers using a
single sign-on.
2 NTLMv2 is the authentication method used by Windows to log into servers.
• Auto: If you choose Auto, the machine will initially search for a Kerberos server. If the Kerberos
server is not detected, NTLMv2 will be used for the authentication method.
• Kerberos: Choose Kerberos, to use Kerberos Authentication only.
• NTLMv2: Choose NTLMv2, to use NTLMv2 Authentication only.
For Kerberos and NTLMv2 Authentication you must also configure the Date&Time settings or
the SNTP protocol (network time server).
For configuring the Date&Time and the SNTP settings, see Synchronize with SNTP server
uu
page 98.
You can also configure the Date&Time settings from the machine’s control panel uu Quick
Setup Guide.
 Username
Enter the Username for the authentication up to 96 characters.
Note
If the username is part of a domain, please input the username in one of the following styles: user@domain
or domain\user.
 Password
Enter the password for the authentication up to 32 characters.
 Kerberos Server Address (if needed)
Enter the KDC Host Address (for example: mypc.example.com) (up to 64 characters) or the IP
address (for example: 192.168.56.189).
d In the Connection Status, you can confirm the last log status. For more information, see Understanding
Error Messages uu page 103.
e Click Submit to apply your settings.