Brother HL-5150D - Manual (Page 88)

4 - 1 OPTIONS
4
This printer has the following optional accessories. You can increase the capabilities of the printer with
these items. Click the symbol
L in the table to see the information for each item.
DIMM
We recommend that you expand the printer memory to avoid any memory full errors.
For HL-5140 and HL-5150D
This printer has 16 MB of standard memory and a slot for optional additional memory. The memory can
be expanded up to a total of 144 MB by installing a commercially available DIMM (Dual In-line Memory
Module).
For HL-5170DN
This printer has 32 MB of standard memory and a slot for optional additional memory. The memory can
be expanded up to a total of 160 MB by installing a commercially available DIMM (Dual In-line Memory
Module).
The following DIMM size can be installed:
In general, DIMM must have the following specifications:
Options
Model DIMM Lower tray unit Print server
HL-5130 N/A N/A L
HL-5140 L L L
HL-5150D L L L
HL-5170DN L L Standard
■ 16 MB
■ 32 MB
■ 64 MB
■ 128 MB
TECHWORKS
TECHWORKS
TECHWORKS
TECHWORKS 12456-0001
12457-0001
12458-0001
12459-0001
For more information, visit Techworks web site at www.techworks.com
Type
CAS Latency
Clock Frequency
Capacity
Height
Parity
DRAM Type 100 pin and 32 bit output
2 or 3
66MHz or more
16, 32, 64 MB or 128 MB
35 mm (1.4 inches) or less
NONE
SDRAM 4 Bank