Brother MFC 7460DN - Manual (Page 76)

Troubleshooting
71
9
The Brother machine cannot print or scan over the network.
The Brother machine is not found on the network even after the successful installation.
Question Interface Solution
Are you using security
software? wired/
wireless See I’m using security software. on page 73.
Is your Brother machine
assigned with an available
IP address? wired/
wireless  Confirm the IP address and the Subnet Mask
Verify that both the IP addresses and Subnet Masks of your computer
and the Brother machine are correct and located on the same network.
For more information on how to verify the IP address and the Subnet
Mask, ask the network administrator or visit the Brother Solutions Center
at http://solutions.brother.com/.
 (Windows
®
)
Confirm the IP address and the Subnet Mask using the Network
Connection Repair Tool.
Use the Network Connection Repair Tool to fix the Brother machine’s
network settings. It will assign the correct IP address and the Subnet
Mask.
To use the Network Connection Repair Tool, ask the network
administrator for the details and then follow the steps below:
Note
• (Windows
®
2000 Professional/XP/XP Professional x64 Edition/Windows
Vista
®
/Windows
®
7) You must log on with Administrator privileges.
• Make sure that the Brother machine is turned on and is
network-connected to your computer.