For windows nt® workstation version 4.0 users, For windows nt, Workstation version 4.0 users – Brother MFC-7820N User Manual
Page 20: Windows nt, For parallel interface cable users), Step 2, Installing the drivers & software
18
Make sure that you have completed the instructions from Step 1 “Setting Up
the MFC” on pages 4 - 9.
1
Turn on your computer.
You must be logged on with Administrator
rights.
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your MFC.
2
Connect the parallel interface cable to your
computer, and then connect it to the MFC.
3
Plug in the power cord and turn on the MFC.
4
Insert the Supplied CD-ROM for Windows
®
into your CD-ROM drive. If the model name
screen appears, select your MFC. If the
language screen appears, select your
language.
5
The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
6
After reading and accepting the ScanSoft
®
PaperPort
®
9.0SE License Agreement, click
Yes.
For Windows NT
®
Workstation Version 4.0 Users
Please close any applications running before
installing the MFL-Pro Suite.
Brother recommends that you connect the
MFC directly to your computer.
If this window does not appear, use
Windows
®
Explorer to run the setup.exe
program from the root directory of the
Brother CD-ROM.
Step 2
Installing the Drivers & Software