Brother MFC-7820N - Manual (Page 8)

6
Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the MFC.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
Connect one end of the telephone line cord
to the jack on the MFC marked LINE and the
other end to a modular wall jack.
Warning
■ The MFC must be grounded using a 3-prong plug.
■ Since the MFC is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your MFC when you connect it to a telephone line.
Similarly, you can protect yourself when you want
to move your MFC by disconnecting the telephone
line first and then the power cord.
3
Install the Power Cord
and Phone Line If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to External
TAD.
For more details, see “Connecting the
MFC” in Chapter 1 of the User’s Guide.
TAD
TAD
Step 1
Setting Up the MFC