Brother PT-1910 - Manual (Page 43)

35
To change the horizontal alignment setting:
1 While holding down c, press R once, and keep c held down to display the
current horizontal alignment setting.
2 While still holding down c, continue pressing R until the desired horizontal align-
ment setting is displayed.
3 Release c to apply the selected horizontal alignment setting to the entire text.
EXAMPLE
This function prints your label so that the text can be read from the adhesive side of the tape. If
mirror-printed labels are attached to glass or some other transparent material, they can be read
correctly from the opposite side.
☞
When using the Mirror printing function, the text should be printed on clear tape.
The default mirror printing setting is OFF.
To select the RIGHT horizontal alignment setting:
1 While holding down c , press R once,
and keep c held down.
2 While still holding down c , continue press-
ing R until RIGHT is displayed.
3 Release c .
ON
L E F T
A L I G N
R I G H T
A L I G N
MIRROR PRINTING FUNCTION